Pinpoint Test I: DTC C1267 - Abs Functions Temporarily Disabled

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

I1 CARRY OUT THE RECALIBRATION PROCEDURE

Key in ON position.
Enter the following diagnostic mode on the diagnostic tool: Clear the DTC.
Carry out the ABS module recalibration procedure using the diagnostic tool.
Enter the following diagnostic mode on the diagnostic tool: Retrieve DTCs.
Are any DTCs retrieved?

Yes

If DTC C1267 is the only code retrieved, INSTALL a new ABS module. REFER to HYDRAULIC CONTROL UNIT (HCU) . REPEAT the self-test. TEST the system for normal operation.

If DTC C1267 is retrieved along with other DTC(S), or DTC(s) other than C1267 are retrieved, go to the ANTI-LOCK BRAKE SYSTEM (ABS) MODULE DIAGNOSTIC TROUBLE (DTC) INDEX .

The ABS system is operating correctly.