Powertrain Control Module Diagnostic Trouble Code (DTC) Index
WARNING: This page is about a different car, the 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC TROUBLE CODE INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1213 | Anti-Theft Number of Programmed Keys is Below Minimum | PCM | Go To PINPOINT TEST F: ANTI-THEFT NUMBER OF PROGRAMMED KEYS IS BELOW MINIMUM . |
| B2431 | Transponder Program Failure | PCM | VERIFY if using correct PATS key, if defective USE new key. |
| B1342 | ECU is Defective (EEFROM in PCM not working) | PCM | INSTALL a new PCM. REFER to POWERTRAIN CONTROL MODULE . |
| B2103 | Antenna Not Connected | PCM | Go To PINPOINT TEST A: NO ANTENNA DETECTED . |
| B1600 | PATS Ignition Key Transponder Signal is Not Received | PCM | Go To PINPOINT TEST B: PATS IGNITION KEY TRANSPONDER SIGNAL IS NOT RECEIVED . |
| B1601 | PATS Received Incorrect Key-Code From Ignition Key Transponder | PCM | Go To PINPOINT TEST C: PATS RECEIVED INCORRECT KEY-CODE FROM IGNITION KEY TRANSPONDER . |
| B1602 | PATS Received Invalid Format of Key-Code From Ignition Key Transponder | PCM | Go To PINPOINT TEST D: PATS RECEIVED INVALID FORMAT OF KEY-CODE FROM IGNITION KEY TRANSPONDER . |
| B1681 | PATS Transceiver Module Signal is Not Received | PCM | Go To PINPOINT TEST E: PATS TRANSCEIVER MODULE SIGNAL IS NOT RECEIVED . |
| - | All Other DTCs | PCM | REFER to MULTIFUNCTION ELECTRONIC CONTROL MODULES . |