Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Anti-Lock Control System - Traction Control System & Stability Assist System) >> Diagnosis And Testing >> Anti-Lock Control - Stability Assist >> Pinpoint Tests >> Pinpoint Test N: The Stability Assist/Traction Control Indicator Is Never/Always On

Pinpoint Test N: The Stability Assist/Traction Control Indicator Is Never/Always On

WARNING: This page is about a different car, the 2003 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Use the correct probe adaptor(s) when making measurements. Failure to use the correct probe adaptor(s) may damage the connector.
Fig 1: Pinpoint Test N: Stability Assist/Traction Control Indicator Is Never/Always On (Step N1-N3)
G03870417Courtesy of FORD MOTOR CO.
Fig 2: Pinpoint Test N: Stability Assist/Traction Control Indicator Is Never/Always On (Step N4-N6)
G03870418Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals