Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2204 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Keyless Entry Keypad >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  2. Position the watershield aside.
  3. Remove the keypad retaining clip.
  4. Remove the keypad from the door.
    • Disconnect the electrical connector.
  5. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals