Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> Windstar Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Fuel Charging System & Fuel Control System - 2.5L (Hybrid)) >> Removal And Installation >> Fuel Pump Control Module >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position aside the LR quarter panel luggage compartment trim.
  2. Disconnect the Fuel Pump (FP) control module electrical connector.
  3. Remove the 2 pin-type retainers and the FP  control module.
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals