Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Driver-Side Air Bag Module >> Installation

Driver-Side Air Bag Module: Installation

WARNING: This page is about a different car, the 2004 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Remove air bag simulator from upper clockspring connector. Connect air bag module wiring connector to upper clockspring connector. Position air bag module on steering wheel. Install air bag module mounting bolts and tighten to specification. See TORQUE SPECIFICATIONS  . Install 2 cover plugs in back of steering wheel. With air bag simulators installed at remaining deployable SRS devices, perform system operation check. See SYSTEM OPERATION CHECK  . Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.

scientia non olet · About Mike's Workshop Manuals