Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 712 (Driveline System - General Information) >> General Procedures >> Axle Housing Weld Leaks Repair

Axle Housing Weld Leaks Repair

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: To keep the axle's sound characteristics, do not disassemble the carrier.
    CAUTION: Rear axle housing straightness is too critical for field repair. Install a new axle housing if a weld is broken.
    NOTE: Most minor weld leaks are repairable. This includes the puddle and fill welds that join the axle shaft tube to the axle housing on integral axles.
  1. Seal the weld.
    • Use Devcon Aluminum Liquid F2 or equivalent meeting Ford specification M-3D35A(E).
      Fig 1: Locating Devcon Aluminum Liquid
      G03461473Courtesy of FORD MOTOR CO.