Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (Body Panel System - Body System - Interior) >> General Procedures >> Manual Operation

Manual Operation

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the overhead console. For additional information, REFER to OVERHEAD CONSOLE .
  2. Insert a hex-head screwdriver in the center of the manual drive slot to depress the release pin. Rotate the screwdriver clockwise until the roof opening panel is closed.
    Fig 1: Inserting A Hex-Head Screwdriver In Center Of Manual Drive Slot
    G03183746Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals