BENCH MODE Procedure for PCx

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Following operating instructions from the NGS menu screen:

Select "Output State Control."
Select "Trans - Bench Mode."
Select "PIDs" to be monitored.
Monitor all selected PIDs during test.
Select "Parameters - PCx."
Select Value "0 - 90 psi."
Press "SEND" to send command.
Select "XXX" to cancel at any time.
Press "SEND."