Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Assembly >> Transmission >> Item 94: Input Shaft Assembly Note

Item 94: Input Shaft Assembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: The splines of the input shaft are not the same length on both ends. The shaft end with the shorter splines goes into the fluid pump.
    Fig 1: Installing Input Shaft
    G03182340Courtesy of FORD MOTOR CO.
  1. Install the input shaft.