Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 547 (Brake System) >> Disassembly And Assembly >> Brake Caliper - Front >> Item 4: Piston Disassembly Note

Item 4: Piston Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Apply moderate air pressure in short bursts to prevent an uncontrolled release of the piston.
    Fig 1: Removing Piston By Applying Moderate Air Pressure Through Bleeder Screw Port
    G03180284Courtesy of FORD MOTOR CO.
  1. Place a piece of wood in the caliper. Remove the piston by applying moderate air pressure through the bleeder screw port.
scientia non olet · About Mike's Workshop Manuals