Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (Automatic Transaxle/Transmission) >> In-Vehicle Repair >> Digital Transmission Range (TR) Sensor >> Removal

Digital Transmission Range (TR) Sensor: Removal

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the shifter in the NEUTRAL (N) position.
  2. Disconnect the battery ground cable.
  3. Raise and support the vehicle. .
  4. Remove the engine splash shield.
  5. Remove the transmission range (TR) sensor.
    1. Remove the shifter cable nut.
    2. Disconnect the TR sensor electrical connector.
    3. Remove the screws.
    4. Remove the TR sensor.
      Fig 1: Removing Shifter Cable Nut
      G03412279Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals