Pinpoint Test TA: Transmission Range (TR) Sensor: Introduction
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
TO PREVENT THE RISK OF HIGH-VOLTAGE SHOCK, ALWAYS FOLLOW PRECISELY ALL WARNINGS AND SERVICE INSTRUCTIONS, INCLUDING INSTRUCTIONS TO DEPOWER THE SYSTEM. THE HIGH-VOLTAGE HYBRID SYSTEM UTILIZES APPROXIMATELY 300 VOLTS DC, PROVIDED THROUGH HIGH-VOLTAGE CABLES TO ITS COMPONENTS AND MODULES. THE HIGH-VOLTAGE CABLES AND WIRING ARE IDENTIFIED BY ORANGE HARNESS TAPE OR ORANGE WIRE COVERING. ALL HIGH-VOLTAGE COMPONENTS ARE MARKED WITH HIGH-VOLTAGE WARNING LABELS WITH A HIGH-VOLTAGE SYMBOL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
This pinpoint test is intended to diagnose the following:
- (TR) sensor (7K004)
- harness circuits: TR-A1, TR-A2, TR-RTN1, TR-RTN2, TR-BVREF1, TR-BVREF2, and VPWR
- powertrain control module (PCM) (12A650)
TR SENSOR CONNECTOR PINS REFERENCE CHART
| Pin | Circuit |
|---|---|
| 5 | TR-A2 (Analog Transmission Range 2) |
| 2 | TR-A1 (Analog Transmission Range 1) |
| 4 | TR-RTN2 (Transmission Range Return 2) |
| 6 | TR-BVREF2 (Transmission Range Buffered Voltage Reference 2) |
| 3 | TR-RTN1 (Transmission Range Return 1) |
| 1 | TR-BVREF1 (Transmission Range Buffered Voltage Reference 1) |
PCM CONNECTOR PINS REFERENCE CHART
| Pin | Circuit |
|---|---|
| T5 | TR-RTN2 (Transmission Range Return 2) |
| T3 | TR-RTN1 (Transmission Range Return 1) |
| T9 | TR-BVREF2 (Transmission Range Buffered Voltage Reference 2) |
| B67, B68 | VPWR (Vehicle Power) |
| T6 | TR-BVREF1 (Transmission Range Buffered Voltage Reference 1) |
| T24 | TR-A2 (Analog Transmission Range 2) |
| T21 | TR-A1 (Analog Transmission Range 1) |