Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1975 (Engine Controls - Powertrain DTC Charts And Descriptions - (Hybrid)) >> DTC Diagnosis >> P0613 - Transaxle Control Module (TCM) Processor

P0613 - Transaxle Control Module (TCM) Processor

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0613 - TRANSAXLE CONTROL MODULE (TCM) PROCESSOR

Description:  This DTC indicates a TCM internal error.
Possible Causes: 
  • TCM processor error
  • TCM A/D converter error
  • TCM EEPROM error
  • Damaged TCM
Diagnostic Aids:  Clear the TCM continuous DTCs. Repeat the self-test. If DTC P0613 is present again, install a new transaxle. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION - ELECTRONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT) .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   See Note 2 - See Note 3