Selector Lever Bezel: Removal

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles

Remove the PRNDL trim ring.

Fig 1: Locating PRNDL Trim Ring
Courtesy of FORD MOTOR CO.
Remove the upper console panel.

Fig 2: Locating Upper Console Panel
Courtesy of FORD MOTOR CO.
Remove the power outlet trim panel from the center console.

Fig 3: Locating Power Outlet Trim Panel
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector and remove the power outlet trim panel.

Fig 4: Locating Electrical Connector
Courtesy of FORD MOTOR CO.
Slide the lower shift knob bezel downward.

Fig 5: Sliding Lower Shift Knob Bezel Downward
Courtesy of FORD MOTOR CO.
Remove the 2 bolts and remove the selector lever knob.

Fig 6: Locating Bolts
Courtesy of FORD MOTOR CO.
Remove the lower shift knob bezel.

Fig 7: Locating Lower Shift Knob Bezel
Courtesy of FORD MOTOR CO.

Vehicles equipped with a light bulb

Disconnect the light from the PRNDL bezel.

Fig 8: Locating Light From PRNDL Bezel
Courtesy of FORD MOTOR CO.

Vehicles equipped with LED illumination

Disconnect the LED electrical connector.

Fig 9: Locating LED Electrical Connector
Courtesy of FORD MOTOR CO.

All vehicles

NOTE: Selector lever shown removed for clarity.

Fig 10: Locating Tabs

Courtesy of FORD MOTOR CO.

Release the 3 tabs and remove the PRNDL bezel.