Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Power Door Locks & Remote Keyless Entry Systems) >> Component Tests >> All-Lock, All-Unlock & Driver Unlock Relays

All-Lock, All-Unlock & Driver Unlock Relays

WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.

Remove appropriate relay from lock relay block. Lock relay block is located behind right side of instrument panel. Check relay continuity. Continuity should exist between relay terminals No. 1 and 2, and between terminals No. 3 and 4. Continuity should not exist between relay terminals No. 3 and 5. Using fused jumper wires, connect positive battery terminal to relay terminal No. 1 and negative battery terminal to relay terminal No. 2. Continuity should now exist between relay terminals No. 3 and 5. Replace relay if continuity is not as specified.

scientia non olet · About Mike's Workshop Manuals