Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1225 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Remote Keyless Entry Keypad >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the beltline weather moulding.
  2. Position the door glass top run aside to access the door pillar trim panel screws.
  3. Remove the 4 door trim panel screws and the door trim panel.
  4. Disconnect the electrical connector and remove the RKE keypad.
  5. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals