Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1997 >> Probe GTS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls - Tests W/Codes) >> Self-Diagnostic System >> Entering Self-Diagnostics >> Notes

Entering Self-Diagnostics: Notes

WARNING: This page is about a different car, the 1997 Ford Aspire. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before hooking up equipment to diagnose EEC system, prepare and visually inspect vehicle. See VISUAL CHECK & VEHICLE PREPARATION.

Codes are accessed from PCM using OBD-II Data Link Connector (DLC) located under left side of instrument panel. See Figure. Follow QUICK TEST  for specific procedure used to retrieve codes. If scan tool displays a system okay DTC (Code 62) after performing QUICK TEST, proceed to the TESTS W/O CODES article for symptom diagnosis.

scientia non olet · About Mike's Workshop Manuals