Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1997 >> Probe Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Keyless Entry System - Remote) >> Removal & Installation >> Keypad >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1997 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.

Remove interior door trim panel. Unplug harness connector. Remove retaining nut. Disengage harness locators from retaining holes. Remove keypad and harness. To install, reverse removal procedure. Tighten keypad retaining nut to 27-35 INCH lbs. (3-4 N.m).

scientia non olet · About Mike's Workshop Manuals