Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1997 >> Contour Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Wiper System & Washer System) >> Removal & Installation >> Generic Electronic Module (Gem)/Central Timer Module (CTM) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1997 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery terminal. Remove GEM/CTM retaining screw. Slide GEM/CTM from retainer tabs. Unplug connector. To install, reverse removal procedure.

scientia non olet · About Mike's Workshop Manuals