Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1997 >> Contour Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Anti-Theft System - Passive) >> Removal & Installation >> Pats Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1997 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. PATS module is located behind center of instrument panel. Remove 2 screws retaining PATS module to bracket. Disconnect wiring harness connector and remove PATS module. To install, reverse removal procedure.

scientia non olet · About Mike's Workshop Manuals