Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1996 >> Probe Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> HVAC System - Compressor Refrigerant Oil Checking >> Servicing Precautions >> Placing System In Operation

Placing System In Operation

After component service or replacement has been completed, evacuate system thoroughly with a vacuum pump. Charge system with proper amount of refrigerant. Refer to the appropriate A/C SYSTEM SPECIFICATIONS article in this section. See the following menu:

Perform leak test. After system has been leak tested, check system operation.

NOTE: A/C systems normally will not need additional refrigerant oil unless oil loss has occurred due to ruptured lines, leaking compressor seals, compressor overhaul or component replacement.
scientia non olet · About Mike's Workshop Manuals