Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1996 >> Econoline E250, Van Cargo Extended, 5.8 H >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 5.8L EEC-IV >> Circuit Tests >> Circuit Test QC - Output State Check Not Functioning >> Diagnostic Aids

Diagnostic Aids

Perform this circuit test when directed by other CIRCUIT TESTS. This test is only intended to diagnose:

  1. Step 1) Check For Codes 121, 122 & 123  Disconnect cruise control servo wiring harness connector (if equipped). Perform KOEO SELF-TEST  . If Code 121, 122 or 123 is present, go to appropriate CIRCUIT TEST. See DIAGNOSTIC TROUBLE CODE REFERENCE CHART  . If Code 111 (pass code) is displayed, go to next step. If no code is displayed, go to CIRCUIT TEST QA.
  2. Step 2) Check Throttle Linkage  Check throttle and linkage for sticking and binding. If throttle and linkage are okay, replace Throttle Position (TP) sensor and repeat QUICK TEST  . If throttle and linkage are binding, repair as necessary and repeat QUICK TEST.
scientia non olet · About Mike's Workshop Manuals