Common Specs & Procedures
(CONTOUR & MYSTIQUE) COMMON SPECS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | 214 Ft. Lbs. (290 N.m) | ||
| Battery | |||
| 2.0L | CAPACITIES | ||
| 2.5L | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | |||
| With ABS | BLEEDING BRAKE SYSTEM | ||
| Without ABS | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | |||
| Service Specifications | DISC BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drum Brakes | |||
| Service Specifications | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | DESCRIPTION | ||
| Torque | N/A | ||
| Drive Belts | |||
| Adjustment | |||
| 4-CYL. | BELT ADJUSTMENT | ||
| V6 | BELT ADJUSTMENT | ||
| Drive Belt Routing | |||
| 4-CYL. | DRIVE BELT ROUTING | ||
| V6 | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | |||
| 4-CYL. | COOLING SYSTEM SPECIFICATIONS | ||
| V6 | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 16 psi | ||
| Thermostat R & I | |||
| 2.0L | THERMOSTAT | ||
| 2.5L | THERMOSTAT | ||
| Water Pump R & I | |||
| 2.0L | WATER PUMP | ||
| 2.5L | WATER PUMP | ||
| Engine Mechanical | |||
| 2.0L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine at normal operating temperature, oil pressure should be 20-45 psi (1.4-3.2 kg/cm2 ) at 1500 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 2.5L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | With engine at normal operating temperature, oil pressure should be 20-45 psi (1.4-3.2 kg/cm2 ) at 1500 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| 2.0L | 81-86 Ft. Lbs. (110-117 N.m) | ||
| 2.5L | 54-64 Ft. Lbs. (73-87 N.m) | ||
| Fuel System | |||
| 2.0L | |||
| Pressure Specification | FUEL PRESSURE | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Filter Location | FUEL FILTER | ||
| Fuel Filter R & I | FUEL SYSTEM | ||
| 2.5L | |||
| Pressure Specification | FUEL PUMP | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Filter Location | FUEL FILTER | ||
| Fuel Filter R & I | FUEL FILTER | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| 2.0L | FIRING ORDER & TIMING MARKS | ||
| 2.5L | FIRING ORDER & TIMING MARKS | ||
| Ignition Wires (Resistance) | |||
| 2.0L | HIGH TENSION WIRE RESISTANCE | ||
| 2.5L | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | |||
| 2.0L | FIRING ORDER & TIMING MARKS | ||
| 2.5L | FIRING ORDER & TIMING MARKS | ||
| Spark Plug | |||
| 2.0L | SPARK PLUGS | ||
| 2.5L | SPARK PLUGS | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 85-105 Ft. Lbs. (115-142 N.m) | ||