Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1995 >> Probe GT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls - System/Component Tests - EEC-IV (2.0L)) >> Fuel Systems >> Fuel System Pressure Release >> All Others

All Others

WARNING: This page is about a different variant/trim than selected.
  1. Remove fuel cap to release fuel tank pressure. Remove relief valve cap. Relief valve is located on fuel supply manifold. Using Fuel Pressure Gauge (T80L-9974-B), release fuel pressure from relief valve (Schrader valve).
  2. If fuel pressure gauge is not available, disconnect electrical connector to IFS switch. For IFS switch location, see INERTIA FUEL SHUTOFF (IFS) SWITCH LOCATION  table. Crank engine for 15 seconds to reduce system pressure.
INERTIA FUEL SHUTOFF (IFS) SWITCH LOCATION

Application Location
Contour & Mystique Behind Left Kick Panel
Probe Left Side Of Cargo Area
scientia non olet · About Mike's Workshop Manuals