Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1995 >> Probe Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - Remove/Install/Overhaul - 2.5L) >> Fuel System >> Injectors >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1995 Mercury Mystique and 1995 Ford Contour. However, it is still accessible from the selected car via links, so may be relevant.

Remove fuel rail from intake manifold. See FUEL RAILS. Disassemble fuel rail and pull injectors from fuel rail. Lubricate new "O" rings with clean engine oil. Install new "O" rings on injectors. Inspect injector "plastic hat" (covering the injector pintle) and washer for deterioration. Replace as necessary.

scientia non olet · About Mike's Workshop Manuals