Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1995 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Engine Controls - Remove/Install/Overhaul - 3.8L SC) >> Fuel System >> Fuel Rails >> Installation

Fuel Rails: Installation

WARNING: This page is about a different car, the 1995 Ford Thunderbird. However, it is still accessible from the selected car via links, so may be relevant.
  1. When installing fuel rail assembly, use new "O" rings. Push fuel rail down to ensure all injector "O" rings are fully seated in fuel rail cups and intake manifold.
  2. Install fuel rail bolts. Tighten to specification. See TORQUE SPECIFICATIONS. To complete installation, reverse removal procedure.
scientia non olet · About Mike's Workshop Manuals