Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1995 >> Explorer 2D Utility, 4WD, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Electronic Suspension >> Electronic - 4WD >> Operation >> Sensor Inputs To Arc Module >> Shock Absorber Encoder Feedback

Shock Absorber Encoder Feedback

Attached to each shock absorber damper motor is a contact circuit providing damper position input to the control module. The signal is grounded when the damper is in firm mode and open in soft mode. This feedback signal is compared in the ARC module to the requested state of each damper. When the feedback signal matches the requested state of the damper, the corresponding damper motor driver is turned off.

scientia non olet · About Mike's Workshop Manuals