Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1994 >> Probe Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Engine Controls - Tests W/Codes - EEC-V (4.6L)) >> Additional System Functions >> Trips & Drive Cycles >> Trip Display On Scan Tool

Trip Display On Scan Tool

WARNING: This page is about a different car, the 1995 Mercury Grand Marquis, 1995 Mercury Cougar, 1995 Lincoln Town Car, 1995 Ford Thunderbird, and 1995 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

On Board System Readiness function is available on New Generation Star (NGS) tester or generic scan tools. Readiness function indicates status of each OBD-II monitor. Parameter Identification (PID) display on NGS tester, indicates status of monitors for a TRIP SET as either Yes or No. A trip must be completed before entry conditions necessary for the monitoring of Catalyst Efficiency Monitor test are enabled.

scientia non olet · About Mike's Workshop Manuals