Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1994 >> Probe Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (HVAC System - A/C-Heater System - Automatic) >> Operation >> Electronic Automatic Temperature Control (EATC) Module >> Temperature Selection Buttons

Temperature Selection Buttons

WARNING: This page is about a different car, the 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Buttons allow desired in-car temperature selection. Pressing Red (warm temp.) button increases temperature setting in one-degree increments up to 85°F (29°C), with a final jump to 90°F (32°C) for maximum heating. Pressing Blue (cool temp.) button decreases temperature setting in one-degree decrements to 65°F (18°C), with a final jump to 60°F (16°C) for maximum cooling.

Fig 1: Identifying EATC Module
G95C60147Courtesy of FORD MOTOR CO.