Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1994 >> Probe Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Rails >> Removal (3.0L & 3.0L Flex Fuel)

Removal (3.0L & 3.0L Flex Fuel)

  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE. Disconnect negative battery cable. Remove air cleaner. Remove snow shield and accelerator cable from throttle body.
  2. Disconnect hoses and wiring from EGR valve. Loosen EGR valve-to-exhaust manifold tube. Remove fuel supply and return lines. See FUEL LINE CONNECTOR. Remove negative battery cable. Remove wiring harness from injectors. Remove throttle body retaining bolts and throttle body.
  3. On gasoline models, remove distributor. See DISTRIBUTOR REMOVAL & INSTALLATION. Disconnect fuel pressure regulator vacuum hose. Remove 4 fuel rail bolts. Carefully disengage fuel rail from injectors. Remove fuel rail assembly.
CAUTION: On flex fuel models, ensure fuel system "O" rings are replaced with methanol compatible "O" rings.
scientia non olet · About Mike's Workshop Manuals