Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1994 >> Crown Victoria Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Wheel Alignment Specifications & Procedures) >> Wheel Alignment Procedures >> Camber Adjustment (Front)

Camber Adjustment (Front)

WARNING: This page is about a different car, the 1994 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Camber/Caster Adjusters (T79P-3000-A) are needed to adjust camber angles. Insert camber/caster adjusters into frame holes. Tighten adjuster hooks finger tight against upper arm inner shaft. Tighten hex nut of each adjuster one additional hex flat.
  2. Loosen upper arm inner shaft-to-frame retaining bolts so lock washers are unloaded. Firmly tap bolt heads to ensure loosening of retaining bolts. Adjust camber angle. Tighten upper arm inner shaft-to-frame retaining bolts.
scientia non olet · About Mike's Workshop Manuals