Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1994 >> Aerostar Van Window Extended, 4.0 X, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Supply Manifold Assembly >> Installation

Fuel Supply Manifold Assembly: Installation

Lubricate NEW injector "O" rings with light oil. DO NOT use silicone grease. Carefully install fuel supply manifold and injectors into lower manifold, one side at a time. To complete installation, reverse removal procedure.

Fig 1: Multi-Point Fuel Injection System (3.0L)
G200126Courtesy of FORD MOTOR CO.


Lubricate NEW injector "O" rings with a light oil. DO NOT use silicone grease. Carefully install fuel supply manifold and injectors into lower manifold, one side at a time. To complete installation, reverse removal procedure.

Fig 1: Multi-Point Fuel Injection System (4.0L)
G90E04613Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals