Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1992 >> Explorer 2D Utility, 4WD, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Adjustments >> Function Control Cable

Function Control Cable

  1. Slide function control lever to its maximum left and right positions. Cable should reach detents on both ends of travel. Ensure proper airflow in each cable position.
  2. To adjust function control cable, move control lever to DEFROST position and hold. Pull on cam jacket until cam travel stops. Reinstall cable housing to clip by pushing it from top until it snaps into place. X1TROUBLE SHOOTING 
scientia non olet · About Mike's Workshop Manuals