Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1991 >> Tempo Base, ATX >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Controls - System/Component Tests - 2.3L) >> Fuel System Testing >> Fuel Pump Relay

Fuel Pump Relay

WARNING: This page is about a different car, the 1991 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Remove relay from vehicle. Connect battery voltage to terminal "C". Ground terminal "D". See Figure . Measure resistance between terminals "A" and "B". Resistance should be less than one ohm with power applied and greater than 10 k/ohms with power removed.

scientia non olet · About Mike's Workshop Manuals