Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1991 >> Probe GL, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Adjustments >> Temperature Control Cable

Temperature Control Cable

  1. Move temperature control lever to MAX WARM position. Remove left side sound deadening panel. Remove cable from cable housing brace on right side of heater case. See Fig 1 .
  2. With cable end on door lever pin, push door lever down to extreme stop. Secure cable on housing brace. Check temperature control lever operation. Install left side sound deadening panel.
    Fig 1: Adjusting Temperature Selector Cable
    G91E05354Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals