Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1991 >> Probe GL, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - Tests W/Codes - EEC-IV) >> Self-Diagnostic System >> Reading Codes >> Separator Pulse

Separator Pulse

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1992 Mercury Tracer, 1992 Mercury Topaz, 1992 Mercury Sable, 1992 Mercury Grand Marquis, and 1992 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.

Single 1/2-second separator pulse is issued 6-9 seconds after last KOEO code. Continuous Memory Codes (soft faults) are then displayed 6-9 seconds after 1/2-second separator pulse. Some digital test equipment may display separator code as "10" instead of "1".