Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1991 >> Bronco 4.9 Y, Standard, M5OD-R2 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Speed Control Does Not Disengage When Brakes Are Applied

Speed Control Does Not Disengage When Brakes Are Applied

  1. Step on brake pedal. Check for proper stoplight operation. See BRAKELIGHT SWITCH TEST. Repair stoplight circuit if necessary. If stoplights operate properly, go to next step.
  2. Check vacuum dump valve. See VACUUM DUMP VALVE TEST. Service vacuum dump valve if necessary. If vacuum dump valve is okay, go to next step.
  3. Check servo. See SERVO TEST. Tap servo body lightly while testing. Replace servo if defective. If servo is okay, go to next step.
  4. Check amplifier. See AMPLIFIER TEST. Replace amplifier if defective. If amplifier is okay, check all connectors and wiring.
scientia non olet · About Mike's Workshop Manuals