Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1990 >> Bronco II RWD, Standard, M5OD-R1 >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Servicing - M/T) >> Lubrication >> Checking Fluid Level >> Transfer Case

Transfer Case

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1994 Ford Ranger, 1994 Ford Pickup, 1994 Ford F-Super Duty, 1994 Ford Explorer, and 1994 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove filler plug. Fluid level should be even with bottom of filler plug hole. Add lubricant as needed.

CAUTION: On Warner 1356 transfer cases with PTO, a filler plug labeled FOR PTO FILL ONLY is located on front of transfer case. These transfer cases require additional lubricant. If proper procedures are not followed, transfer case or PTO failure could result.
scientia non olet · About Mike's Workshop Manuals