Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1990 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Test Fa - Neutral Drive Switch (NDS) A/C Input >> Test Fa: Step 17 >> 4.9L Engines Only

4.9L Engines Only

Measure resistance between test pin No. 43 at the breakout box and battery positive side of the A/C cycle pressure switch.

If resistance are less than 5 ohms, EEC-IV system is not at fault. Repair or replace cycle pressure switch. If resistances are greater than 5 ohms, repair open circuit and remove breakout box. Reconnect all components and repeat QUICK TEST.