Fuel System Pressure Release
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Ford Ranger, 1992 Ford RV Cutaway, 1992 Ford Pickup, 1992 Ford F-Super Duty, and 1992 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove fuel tank cap. Using Fuel Pressure Gauge (T80L-9974-B), release pressure from system at pressure relief valve (Schrader valve), located on fuel injection manifold rail.
- If fuel pressure gauge is not available, disconnect electrical connector to inertia switch located on left side of luggage compartment. Remove fuel cap to release fuel tank pressure. Crank engine for 15 seconds to release system pressure.