Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1989 >> Probe GL, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Adjustments >> Control Cables >> Function Selector Cable

Function Selector Cable

  1. Position function selector lever in "DEFROST" position. Remove left side sound deadening panel. Remove cable, located on left side of heater case, from cable housing brace.
  2. With cable end on door lever pin, push door lever down to extreme stop. Secure cable into cable housing brace. Install left side sound deadening panel.
scientia non olet · About Mike's Workshop Manuals