Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1989 >> Probe GL, Automatic >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Programmed Ride Control >> PRC System Self-Diagnostics >> Pinpoint Test Q6 >> Test Connector Short

Test Connector Short

Leave PRC control module connector disconnected. Turn ignition off. Set VOM on 200K-ohm scale. Measure resistance between Blue/White wire and ground. If resistance is more than 10K ohms, proceed to PINPOINT TEST Q7 . If resistance is NOT more than 10K ohms, repair Blue/White wire between control module and test connector as necessary.

scientia non olet · About Mike's Workshop Manuals