Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1984 >> Ranger 2.2 P >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Clutch Switch Test >> Vehicles With Man. Trans.

Vehicles With Man. Trans.

  1. Ensure that clutch switch is depressed (switch closed) when clutch pedal is released, as Cruise control will not operate unless this condition exists. Correct if necessary, before performing test.
  2. Disconnect clutch switch connector from speed control harness connector, and connect an ohmmeter to switch connector terminals. With clutch pedal released and switch plunger depressed (switch closed), resistance should be less than 5 ohms.
  3. With clutch pedal depressed and switch plunger fully extended (switch open), resistance should be infinity (open circuit).
scientia non olet · About Mike's Workshop Manuals