4WD Models
WARNING: This page is about a different car, the 1983 Ford Pickup, 1983 Ford Cab & Chassis, and 1983 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
- The turning angle stop screws are located on back side of steering knuckle, just above axle shaft centerline. To adjust, loosen stop screw lock nut.
- Using full-floating turn table under each wheel, adjust turning angle by adjusting stop screw IN to increase and OUT to decrease turning angle.
TURNING ANGLE ADJUSTMENT 4WD ONLY
| Application | Left Wheel | Right Wheel |
|---|---|---|
| Bronco & F150 | 36° | 36° |
| F250 | 33.4° | 33.4° |
| F350 | 30.3° | 30.3° |