Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 1977 >> Bronco Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Linkage >> All Models >> Drag Link Replacement (F-250 4WD Only)

Drag Link Replacement (F-250 4WD Only)

  1. Replace drag link if ball studs are excessively loose or if drag link is bent. Do not attempt to straighten drag link.
  2. Remove cotter pins and nuts. Separate ball studs from mating parts. To install, reverse removal procedure. Tighten nuts and install cotter pins.
scientia non olet · About Mike's Workshop Manuals