Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Fiat >> 2012 >> 500 Pop, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Electronic Control Modules (Service Information) Except 500E) >> Standard Procedure >> Program The IPC (Instrument Panel Cluster)

Program The IPC (Instrument Panel Cluster)

WARNING: This page is about a different car, the 2013 Fiat 500c and 2013 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the scan tool.
  2. Check vehicle for DTC's.
  3. Clear all stored DTC's.
  4. Turn car OFF then ON and confirm DTCS are gone.
  5. From the Vehicle View, Click on the IPC icon >> Misc. Functions >> Proxi Configuration

If required, continue to programming the next module.

scientia non olet · About Mike's Workshop Manuals