Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Fiat >> 2012 >> 500 Pop, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Electronic Control Modules (Service Information) Except 500E) >> Module, Powertrain Control [EAJ] >> Removal >> Removal

Module, Powertrain Control [EAJ]: Removal: Removal

WARNING: This page is about a different car, the 2013 Fiat 500c and 2013 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Powertrain Control Module (PCM) Electrical Connectors
GC0153570Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and remove the battery (Refer to REMOVAL ).
  2. Disconnect the Powertrain Control Module (PCM) electrical connectors (1 and 2).
    Fig 2: Powertrain Control Module (PCM)
    GC0153571Courtesy of CHRYSLER GROUP, LLC
  3. Remove the four nuts (2) with ground strap (3) and remove the PCM (1) from the battery tray.
scientia non olet · About Mike's Workshop Manuals