Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Fiat >> 2012 >> 500 Pop, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Standard Procedure >> Program The TPM (Tire Pressure Monitor Module)

Program The TPM (Tire Pressure Monitor Module)

  1. Connect the scan tool.
  2. Check vehicle for DTCs.
  3. Clear all stored DTCs.
  4. Turn car OFF then ON and confirm DTCs are gone.
  5. Go to TPM >> Misc. Functions >> Proxi Alignment.

If required, continue to programming the next module.

scientia non olet · About Mike's Workshop Manuals