Sensor, Camshaft Position: Removal: Removal

Fig 1: Engine Cover

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove the engine cover (1).
   Fig 2: Air Cleaner Body Assembly

   Courtesy of CHRYSLER GROUP, LLC
3. Remove the air cleaner body (6). Refer to BODY, AIR CLEANER, REMOVAL - [EAB] .
   Fig 3: PCV Hose, Bolts, Vent Hose & Oil Separator Housing

   Courtesy of CHRYSLER GROUP, LLC
4. Disconnect the PCV hose (1) from the intake manifold.
5. Disconnect the vent hose (3) from the oil filler neck.
6. Remove three bolts (2) and remove the oil separator housing (4) from the cylinder head cover.
   Fig 4: Camshaft Position (CMP) Sensor Electrical Connector

   Courtesy of CHRYSLER GROUP, LLC
7. Unlock and disconnect the camshaft position (CMP) sensor electrical connector (1).
   Fig 5: Camshaft Position (CMP) Sensor & Bolt

   Courtesy of CHRYSLER GROUP, LLC
8. Remove the mounting bolt (2) and camshaft position (CMP) sensor (1).
   Fig 6: Camshaft Position (CMP) Sensor O-ring

   Courtesy of CHRYSLER GROUP, LLC
9. The camshaft position (CMP) sensor O-ring (1) can be reused if not damaged.